to agree that we must cut miter angles of 45 ° for the corner joints,
In my case has been complicated by having to unis bits of different sizes.
Well folks I decided to put a wooden frieze in the room. It seems like a good solution if you have a cold wall, as is the case. Now in its day I put a double window that insulate them from cold and noise. Battens in principle parallel to the floor, then Iran They caught the slats With some staples. Iran slats an inch off the ground on the issue of expansion. And between the slats and the wall will isolate the material was such that floor but we will do very well on the wall. The slats can put the thickness you want, I have put those thick enough to hide the radiator tubes. If switches are not surface, you have to take the boxes built for
mechanisms fit you, cut the overall CPI House,
